USA
Canada
Universal Splashboard Fender
Size Guide
| XS XS | S S | M M | L L | XL XL | XXL XXL | |
|---|---|---|---|---|---|---|
| Chest | 78 31.3 | 84 33.7 | 90 36.1 | 96 38.6 | 102 41 | 108 43.4 |
| Waist | 65 26.1 | 70 28.1 | 75 30.1 | 80 32.1 | 86 34.5 | 92 36.9 |
| Seat | 83 33.3 | 89 35.7 | 95 38.2 | 101 40.6 | 107 43 | 113 45.4 |
| Inseam | 76.5 23.3 | 78 23.9 | 79.5 24.5 | 81 25.1 | 82.5 25.7 | 84 33.7 |
| Arm Length | 58 23.3 | 59.5 23.9 | 61 24.5 | 62.5 25.1 | 64 25.7 | 65.5 26.3 |
| Shoulder to Shoulder | 36 14.5 | 38 15.2 | 40 16.1 | 42 16.9 | 44 17.7 | 46 18.5 |
Measurement Guide
Measure the circumference of your chest, waist, and hips for jerseys, jackets, and vests. Measure the circumference of your waist and length of your inseam for shorts, pants, and bibs.
WARNING for California Residents
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
Don't Let Conditions Keep You Inside
Our splashboard fender was designed to better protect the bike and rider during wet and muddy conditions.
Take your adventures deep into the backcountry without fear of mud, water, or snow with our simple to use splashboard fender for QuietKat eBikes.
Add more coverage from front wheel spray while still being able to easily remove and install the battery. The Universal Splashboard Fender attaches securely to the battery case using strong, battle tested, double-sided adhesive. This fender is compatible with any QuietKat Electric Bike that has an integrated battery. Don't let the trail dictate if your gear gets muddy.
Installation Guide:
- Begin installation when ambient air temperature is between 70 and 100F.
- Remove the battery from the bike.
- Clean battery case with IPA wipes (provided with purchase) to remove dust, oil, and debris. Let dry.
- Align the Splashboard such that the wide side is towards the top of the battery case, ensuring that the splashboard is 1 inch or more below the top of the battery case.
- Remove the adhesive backing on the splashboard.
- Apply about 40lbs of pressure using your palms and working your way along the surface above where the tape contacts the battery tray. Each time you press, hold for a few seconds before moving down the length of the battery tray.
Material: Durable Plastic
Batter Case Connection: Attach directly to the battery in the down tube
Width: 5” Wide
Compatibility: MY 21+ Pioneer, Villager, Ranger, Warrior, Apex Sport, Pro, HD & XD
Features
Take your adventures deep into the backcountry without fear of mud, water, or snow with our simple to use splashboard fender for QuietKat eBikes.
Add more coverage from front wheel spray while still being able to easily remove and install the battery. The Universal Splashboard Fender attaches securely to the battery case using strong, battle tested, double-sided adhesive. This fender is compatible with any QuietKat Electric Bike that has an integrated battery. Don't let the trail dictate if your gear gets muddy.
Installation Guide:
- Begin installation when ambient air temperature is between 70 and 100F.
- Remove the battery from the bike.
- Clean battery case with IPA wipes (provided with purchase) to remove dust, oil, and debris. Let dry.
- Align the Splashboard such that the wide side is towards the top of the battery case, ensuring that the splashboard is 1 inch or more below the top of the battery case.
- Remove the adhesive backing on the splashboard.
- Apply about 40lbs of pressure using your palms and working your way along the surface above where the tape contacts the battery tray. Each time you press, hold for a few seconds before moving down the length of the battery tray.
Specs
Material: Durable Plastic
Batter Case Connection: Attach directly to the battery in the down tube
Width: 5” Wide
Compatibility: MY 21+ Pioneer, Villager, Ranger, Warrior, Apex Sport, Pro, HD & XD
